Taking control of your Fibaro intellegent home from anywhere in the world is easy. It gives you piece of mind and added security. All you need is an Internet connection.
Setting up remote access:
In most cases, your Home Center is already set up for remote access. To check this, go to the Configuration tab and LAN Settings on the left, find the last setting “Remote access” and use the drop down options to select “Yes” if it isn’t already. Then click the blue save button on the right of the screen.
Once you have told the Home Center you want to access it remotely, you then need to sign up for an account on home.fibaro.com.
Click the green “Register” button and fill out the new account details. Remember the username and password you put here as you will need it whenever you login, or if you decide to put this information into a mobile device.
After logging in for the first time you will be presented with an “Add HC” option.
Following this you will be asked for your Home Center serial number and MAC address, both of these can be found on either the base sticker of the Home Center; or under general information on the Configuration page of the Home Center interface.
The last thing you need to do after you have signed up at home.fibaro.com is input your details to your phone or tablet that you set up earlier.
Simply go to the settings of your mobile device and then into the section “Remote access”, input your home.fibaro.com details and click save.
For a mobile phone, adding the remote login details will look a little different but again, very straight forward when inputting them.
You now have access to your home whenever you want and wherever you are!
